1.1 This code is applicable to the engineering design of instrument measuring tubing and instrument signal transmission wiring in newly-built and extended automatic control engineering of petrochemical industry and the reformation of equipment may be carried out by referring to it.
1.2 During the implementation of this code, the requirements of currently related mandatory standard and specification shall also be confirmed.
2 Normative References
The following normative documents contain provisions which, through reference in this code, constitute provisions of this code. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this code are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB 50058 Electrical Installations Design Code for Explosive Atmospheres and Fire Hazard
SH 3081 Design Code for Instrument Grounding in Petrochemical Industry
SH 3082 Code for Design of Instrument Power Supply for Petrochemical Industry
3 General Requirements
3.1 The engineering design for instrument tubing and wiring shall achieve: the measurement of instrument is exactly, the signal transmission is reliable, safe, economical and practical with less lag, the wiring is in good order and is aesthetic to be convenient for construction and maintenance.
3.2 Where the instrument tubing and wiring is designed in an environment with fire and explosion hazard, corrosion, high temperature, moisture and vibration, the corresponding protection measures shall be taken.
