This standard specifies the classification, size, code, material, requirements, test method, inspection rule, marking, packaging, transportation and storage of various automatic doors for building.
This standard is applicable to sliding automatic door (arc-shaped automatic door), slide hung automatic door, folding automatic door and revolving automatic door.
Other kinds of automatic door may refer to this standard. For the automatic door for special purpose, the relevant standards shall also be referred.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to research whether the latest editions of these documents are applicable. For any undated references, the latest edition of the document referred to applies.
GB156 Standard Voltage
GB 4208 Degrees of Protection Provided by Enclosure (IP Code)
GB 4706.1 Household and Similar Electrical Appliances - Safety - Part 1: General Requirements
GB/T 191 Packaging -Pictorial Marking for Handling of Goods
GB/T 2423.1 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods Tests A: Cold
GB/T 2423.3 Basic Environmental Testing Procedures for Electric and Electronic Products- Test Ca: Damp Heat, Steady State
GB/T 3797 Electrical Control Assemblies
GB/T 5237 Wrought Aluminum Alloy - Extruded Profile for Architecture
GB/T 5823 Doors and Windows for Building - Terminology
GB/T 6388 Transport Package Shipping Mark
GB/T 7106 Graduation and Test Method for Wind Resistance Performance of Windows
GB/T 7107 Graduation and Test Method for Air Performance of Windows
GB/T 8484 Graduation and Test Method for Thermal Insulating Properties of Windows
GB/T 12754 Prepainted Steel Sheet
GB/T 13306 Plates
GB/T 14436 General Principles of Industrial Product Guarantee Documents
JGJ 113 Technical Specification for Application of Architectural Glass
JG/T 73 Cold Forming Sectional Stainless Steel in Architecture
JG/T 122 Wood Doors and Windows for Building
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions as well as those specified in GB/T 5823 apply.
3.1 Automatic door
A generic term of doors equipped with components such as running device, induction device and door body and the automatic opening/closing entrance/exit of which are controlled by various signals.
3.2 Running device
The automatic opening/closing device composed of driver and controller.
3.3 Induction device
