1.0.1 To raise the level of construction and management of automation instrumentation (hereinafter referred to as instrumentation) engineering and to guarantee the engineering quality, this Code is worked out.
1.0.2 This Code applies to the construction and acceptance of industrial and civil instrumentation engineering.
This Code does not apply to the installation of instrumentation in places of manufacturing, storage or using explosive substances as well as the instrumentation of transportation tools, in mining or for metrological use.
1.0.3 The construction of instrumentation engineering shall meet what specified by design documents and in this Code as well as meeting requirements in the product installation instructions. Any modification to the design shall be confirmed by original designer.
1.0.4 The instrumentation and taps directly installed in equipment or piping shall be constructed in accordance what specified by design documents for the division of disciplines.
1.0.5 The equipment and materials used for the instrumentation engineering shall meet relevant mandatory national standards in force.
1.0.6 The welding in instrumentation engineering shall meet relevant stipulations in national standard in force the Code for Construction and Acceptance of Welding Engineering of Site Equipment and Industrial Piping GB 50236 C 98.
1.0.7 The construction of instrumentation engineering shall, apart from compliance with this Code, also meet what specified in relevant mandatory national standards in force.
