Standard No.:	GB 50116-2013
Chinese Name:	火灾自动报警系统设计规范
English Name:
Professional Classification:	GB National Standard
Issued by:
Issued on:	2013-09-06
Implemented on:	2014-05-01
Status:	VALID
Replace:	GB50116-1998 Code for design of automatic fire alarm system
Target Language:	English
File Format:	PDF
Word Count:	68000 words
Translation Price:	2040 (USD)
Delivery:	via email in 1-10 business day

1.0.1 This code is formulated with view to rational design of automatic fire alarm system, prevention and reduction of fire hazards and protection of the personal and property safety.
1.0.2 This code is applicable to design of automatic fire alarm system located in the constructed, renovated and extended building and structure but not applicable to that located at the places for production and storage of gunpowder, explosive, ammunition and explosive device.
1.0.3 Aimed at the features of the protected objects, the design of automatic fire alarm system shall comply with the relevant national guideline and policy and realize the safety and reliability, advanced technology and economic feasibility.
1.0.4 The design of automatic fire alarm system shall not only comply with this code but those in the current relevant standards of the nation.

1 总则
2 术语
3 系统保护对象分级及火灾探测器设置部位
3.1 系统保护对象分级
3.2 火灾探测器设置部位
4 报警区域和探测区域的划分
4.1 报警区域的划分
4.2 探测区域的划分
5 系统设计
5.1 一般规定
5.2 系统形式的选择和设计要求
5.3 消防联动控制设计要求
5.4 火灾应急广播
5.5 火灾警报装置
5.6 消防*电话
5.7 系统接地
6 消防控制室和消防联动控制
6.1 一般规定
6.2 消防控制室
6.3 消防控制设备的功能
7 火灾探测器的选择
7.1 一般规定
7.2 点型火灾探测器的选择
7.3 线型火灾探测器的选择
8 火灾探测器和手动火灾报警按钮的设置
8.1 点型火灾探测器的设置数量和布置
8.2 线型火灾探测器的设置
8.3 手动火灾报警按钮的设置
9 系统供电
10 布线
10.1 一般规定
10.2 屋内布线
附录A 探测器安装间距的极限曲线
附录B 不同高度的房间梁对探测器设置的影响
附录C 按梁间区域面积确定一只探测器保护的梁间区域的个数
附录D 火灾探测器的具体设置部位（建议性）
D.1 特级保护对象
D.2 一级保护对象
D.3 二级保护对象
附录E 本规范用词说明
附加说明