Replace the Chapter 1 of GB 2099.1-2008 by:
This part of GB 2099 specifies the technical requirements of rated value, marks, electric shock protection, structure, electrical properties and mechanical properties of adaptors.
This part is applicable to shuttered and non-shuttered, fused and non-fused adaptors for a.c. only.
This part not applicable to cord extension set.
Fuses of fused adaptors mentioned in this part are not intended to protect appliance or parts of them against overload.
Note: Intermediate adaptors (GB 2099.3-2008, definition 3.106) of GB 2099.3-2008 revised as GB 2099.7-2015 “Plugs and Socket-outlets for Household and Similar Purposes — Part 2-7: Particular Requirements for Cord Extension Sets”.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
The Chapter 2 of GB 2099.1-2008 “Plugs and Socket-outlets for Household and Similar Purposes — Part 1: General Requirements” is applicable except as follows:
Add to the list of normative references:
GB/T 13539 (All parts) Low-voltage Fuses [IEC 60269 (All parts)]
GB 15092.1 Switches for Appliances — Part 1: General Requirements (GB15092.1-2010, IEC61058-1:2008 (Ed.3.2), IDT)
GB 16915.2 Switches for Household and Similar Fixed Electrical Installations — Part 2-1: Particular Requirements — Electronic Switches (GB 16915.2-2012, IEC60669-2-1:2009 (Ed4.1), MOD)
IEC/TR 60083 Plugs and Socket-outlets for Domestic and Similar General Use Standardized in Member Countries of IEC
?
3 Terms and Definitions
The Chapter 3 of GB 2099.1-2008 is applicable except as follows:
Replace Note 3 by:
Note 3: The term "accessory" is used as a general term covering plugs, socket-outlets and adaptors; the term "portable accessory" covers plugs, portable socket-outlets and adaptors.
Add the following note 5:
Note 5: The term "adaptor" is used as a general term covering all types of adaptors except where reference is made to one particular type.
3.12 Replace by:
Cord extension set
Assembly consisting of one flexible cable fitted with one plug and one single or multiple portable socket-outlets.
Note 1: The Legend of cord extension set as shown Figure 1 a) of GB 2099.1-2008.
Note 2: Cord extension set within the scope of GB 2099.7.
Note 3: Term "plug" include plug and plug with fuses. Term "socket-outlet" also include socket-outlet with assembly, for example switch and fuse, etc. (see 14.22 of GB 2099.1-2008).
Note 4: Modified from GB 2099.1-2008, definition 3.12.
3.25 Replace by:
Rated voltage
Voltage assigned to the accessory by the manufacturer, which will be that specified in the standard sheet, if any.
3.26 Replace by:
Rated current
Current assigned to the accessory by the manufacturer, which will be that specified in the standard sheet, if any.
Add the following definitions:
3.101
Adaptor
Portable accessory constructed as an integral unit incorporating both a plug portion and one or more socket-outlet portions.
3.102
Fused adaptor
Adaptor incorporating a replaceable fuse link in one or more current-carrying poles.
3.103
Polarized fused adaptor
Fused adaptor constructed so that, when inserted in a socket-outlet installed in a polarized wiring installation, the correct relationship between the neutral and the line pole or poles is maintained.
3.1 04
Multiway adaptor
Adaptor which allows the connection simultaneously of more than one plug to all socket-outlet portions of the adaptor.
