Standard No.:	CNCA-C10-01:2014
Chinese Name:	Implementation Rules for Compulsory Product Certification – Lighting Appliances
English Name:	强制性产品认证实施规则 照明电器
Issued by:
Issued on:	2014-07-16
Implemented on:	2014-09-01
Status:	VALID
Language:	English
File Format:	PDF
Word Count:	5500 words
Price(USD):	70 (USD)
Delivery:	via email in 1 business day

0 Introduction

This Rule is prepared basing on safety risks and certification risks for lighting apparatus and specifies the basic principles and requirements for implementing compulsory product certification on lighting apparatus.
This Rule is used in combination with CNCA general implementation rules, e.g. "Implementation Rule on Compulsory Product Certification - Classified Management, Selection and Determination of Certification Mode of Manufacturing Enterprises", "Implementation Rule on Compulsory Product Certification - Utilization of Testing Resources and Other Certification Results of Manufacturing Enterprises" and "Implementation Rule on Compulsory Product Certification - General Requirements of Factory Inspection".
Certification body shall, in accordance with the requirements of universal implementation rules and this Rule, formulate certification implementation rules and this Rule shall be put into force in combination with universal implementation rules.
Manufacturers shall ensure that their certified products always meet the requirements of certification and applicable standards.

1 Scope of Application

This Rule is applicable to the lighting apparatus, including fixed general purpose luminaires with supply voltage between 36V and 1000V; recessed luminaires; portable general purpose luminaires; aquarium luminaires; outlet installed night light; recessed luminaires on ground surface; portable luminaire for children; fluorescent lamp ballast with supply voltage between 36V and 1000V; ballast for discharge lamp (except fluorescent lamp); ac electronic ballast for fluorescent lamp; DC or AC electronic ballast for discharge lamp (fluorescent lamp); DC or AC electronic controls for LED module.
The adjustment of application scope caused by the changes of laws, regulations, relevant products standards, technologies, and industrial policies, shall be subject to the announcement issued by CNCA.

2 Terms and Definitions

Design appraisal: In this Rule, it is a non-experimental verification measure, refers to methods of examination and calculation of design drawing to prove that products comply with the certification standards.

...
The above standards shall be the latest edition issued by the national standardized administrative department in principle. Where other editions are needed, the announcement applicable to the requirements of relevant standards and issued by CNCA shall be observed.

4 Certification Mode